background image

4

ENGLISH

IMPORTANT

Before connecting and using this product, please read this instruction manual carefully and 
keep it on hand for future reference.
The manual is to be considered an integral part of this product and must accompany it when 
it changes ownership as a reference for correct installation and use as well as for the safety 
precautions.

RCF S.p.A.

 will not assume any responsibility for the incorrect installation and / or use of this 

product.

WARNING: 

To prevent the risk of fire or electric shock, never expose this product to rain or 

humidity.

SAFETY PRECAUTIONS
1. 

All the precautions, in particular the safety ones, must be read with special attention, as 

they provide important information.

2.1 PRIMARY POWER SUPPLY FROM MAINS

 

-

The mains voltage is sufficiently high to involve a risk of electrocution: never install or 
connect this product when its power cord is plugged in.

 

-

Before powering up, make sure that all the connections have been made correctly and the 
voltage of your mains corresponds to the voltage shown on the rating plate on the unit, if 
not, please contact your RCF dealer.

 

-

The metallic parts of the unit are earthed by means of the power cord.

 

-

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a 
protective earthing connection.

 

-

Protect the power cord from damage. Make sure it is positioned in a way that it cannot be 
stepped on or crushed by objects.

 

-

To prevent the risk of electric shock, never open this product: there are no parts inside that 
the user needs to access.

2.2 SECONDARY (/ EMERGENCY) POWER SUPPLY THROUGH BATTERIES

 - WARNING: use external DC power source with 15A current rating protection facility.

 

-

The apparatus operating voltage is 24 V dc (therefore, it is necessary to connect in series 
several batteries having a lower nominal voltage, example: 2 x 12 V).

 

-

Always use rechargeable batteries, which need to be chosen according to the maximum 
possible load.

 

-

Verify the polarity of batteries is correct.

 

-

Do NOT short-circuit batteries (i.e. connecting the 2 opposite poles together with metallic 
wires).

 

-

Throw empty batteries away according to your country laws about ecology and environment 
protection.

3.

 Make sure that no objects or liquids can get into this product, as this may cause a short 

circuit. This apparatus shall not be exposed to dripping or splashing. No objects filled with 
liquid, such as vases, shall be placed on this apparatus. No naked sources (such as lighted 
candles) should be placed on this apparatus.

4. 

Never attempt to carry out any operations, modifications or repairs that are not expressly 

described in this manual. 
Contact your authorized service centre or qualified personnel should any of the following occur:

 

-

The product does not function (or functions in an anomalous way).

 

-

The power cord has been damaged.

 

-

Objects or liquids have got in the unit.

 

-

The product has been subject to a heavy impact.

5.

 If this product is not used for a long period, disconnect the power cord (and or batteries).

6.

 If this product begins emitting any strange odours or smoke, switch it off immediately and 

disconnect the power cord (and / or batteries).

IMPORTANT

WARNING

SAFETY PRECAUTIONS

WARNING

Содержание UP 1121

















Отзывы: