1
ENGLISH
Put together the loudspeaker and the U bracket
A
by fastening (on both sides) a M8 bolt
B
into
the loudspeaker hole
E
through the 2 washers
C
and the spacer
D
.
Before tightening the 2 bolts
B
, adjust the loudspeaker aiming and then (when you are sure of
the proper angle) fix that position with 2 thread-forming screws
F
into 2 little holes
G
of the
loudspeaker (passing through the U bracket); then, tighten the 2 bolts
B
firmly.
Note: do NOT tilt the loudspeaker upwards!
Reconnect the wires and
remount the horn loaded driver
(picture 4).
Remount the protection grille
(picture 5).
SINGLE LOUDSPEAKER INSTALLATION
Loudspeakers are to be install by qualified personnel, respecting all safety standards. Loudspeakers
are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical characteristics for
the loudspeaker weight, without the risk of a fall that could damage things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. screw anchors for bricks, screw anchors
for concrete, etc.).
A
F
B
C
D
G
E
picture 4
picture 5
