ENGLISH
NOTES ABOUT CONSTANT VOLTAGE SYSTEMS
• The loudspeaker input voltage (Vd) must correspond to the amplifier output
voltage (Va).
• The sum of nominal power values (Pd x n) of all loudspeakers connected to
the line must not exceed the amplifier power (Pa).
• Make sure all loudspeakers are connected in phase to ensure a correct
audio reproduction.
NOTES ABOUT LOW IMPEDANCE CONNECTIONS
• The total loudspeaker impedance must not be lower than the amplifier
output impedance.
Note:
a loudspeaker total impedance equal to the amplifier output one
permits to get the maximum deliverable power (but an higher loudspeaker
impedance entails less power).
• The total loudspeaker power shall be adequate for the maximum deliverable
power of the amplifier.
• The loudspeaker line shall be short (for long distances, it may be necessary
to use cables with large cross-section wires).
white
black
Total impedance: 8 Ω
white
white
black
black
Total impedance: 4 Ω
–
+
–
+
8 Ω
8 Ω
8 Ω
Содержание MQ80P
Страница 27: ......