RCF MQ80P, Руководство пользователя, Страница: 22 / 28

ENGLISH
Mount the cluste to the “U” bracket
by tightening other two round knobs
or bolts to fix the first loudspeaker,
and the two linking supports (with the
second loudspeaker). Pay attention to
the cluster horizontal aiming.
Fix the safety steel cables (previously
attached to the mounting accesssory
screws) to loudspeakers
If necessary, loosen (just a little bit) the
two round knobs / bolts of the second
loudspeaker momentarily, in order
to allow an easier insertion of the two
linking supports on the first loudspeaker
(then make sure all knobs are tightened
properly).
THREE LOUDSPEAKER CLUSTER
Note: for safety reasons, the cluster shall be made horizontally only (by
putting together three loudspeakers in vertical position).
It is necessary to use four linking
supports
C (two up and two down) to
make the three loudspeaker cluster.
To get the 45° angle between the
two loudspeaker axes, use the three
spaces between teeth (of both sides,
here pointed out in grey) closer to the
centre of the linking support.
Put together two linking supports, in
order to get a 45° angle between the
left and the central loudspeaker,
a 45° angle between the
central and the right
loudspeaker.
Make the cluster by putting the three
loudspeakers together and fix the central
one (and the four linking supports) by
tightening two round knobs / bolts (up
and down).
45°
45°
C
C
C
45°
2nd loudspeaker
1st loudspeaker