RCF DMA 162, Руководство пользователя

Страница: 10 / 48

10
DMA 82 / DMA 162 FRONT PANEL
[1]
Display (OLED). When no menu is selected, the current output levels are displayed as bars.
[2]
Rotary encoder and push-button to select. Turn the encoder either clockwise to increase the
MASTER VOLUME
level or
counterclockwise to decrease it. Press it to toggle
MUTE ALL / UNMUTE ALL
. In the edit mode (after pressing
MENU [3]
): turn the
encoder either clockwise to scroll the menu downwards or increase the selected parameter value, turn it counterclockwise to scroll
the menu upwards or decrease the selected parameter value. Press to select (and enter a submenu).
[3] MENU
button: press to enter the edit mode and select the menu home page.
[4] BACK / ESC
button: press to quit the displayed menu. If pressed for 4 seconds, it activates the “lock” state of the front panel and
inhibit all commands. A small locker icon in the upper-left corner of the display will be shown. To release the function press again for
4 seconds.
[5] CH A / PEAK
(two LEDs): CH A is lit when the audio signal is present on the channel A. PEAK blinks when the signal level of the
channel A reaches the clipping point, causing the limiter intervention; if it is steady lit, its volume level is excessive and needs to be
reduced.
[6] CH B / PEAK
(two LEDs): CH B is lit when the audio signal is present on the channel B. PEAK blinks when the signal level of the
channel B reaches the clipping point, causing the limiter intervention; if it is steady lit, its volume level is excessive and needs to be
reduced.
[7] CHANNEL A MUTE
(LED): when lit, the channel A output is muted.
[8] CHANNEL B MUTE
(LED): when lit, the channel B output is muted.
[9] AUX
input (3.5 mm stereo TRS jack). If a jack plug is inserted into this input, the rear panel INPUT 1 is disabled.
[10] STAND-BY
button with LED: push to toggle the amplifier on/stand-by. The LED is lit white when the amplifier is turned on, red
when the amplifier is in stand-by.