26
VCR Basics
Playing a Tape
1.
Tune the TV to your VCR viewing channel
(3, 4, or TV’s video input).
2.
Insert a tape in the VCR.
PAUSE
POWER
TV•VCR
CHANNEL
RECORD
TRACKING
FWD
EJECT
PLAY
REV
STOP
INPUT
If the AUTO PLAY feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is removed).
•
Press FWD or REV to position the tape.
•
Press PLAY (if necessary) to begin tape play.
•
Press PAUSE for stop action.
•
Press TRACKING up or down to remove any streaks from the
picture, if necessary.
•
Press STOP to stop playback.
Automatic Rewind
The VCR automatically rewinds the tape if it reaches the end of
the tape during playback. While rewinding, you can press
POWER and the VCR will turn off after rewinding.
Automatic Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR’s power is
turned on.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
MUTE
Reduces volume to minimum level.
Numbers (0 through 9)
Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
POWER
Turns the TV on and off.
VOL Up and Down
Raises and lowers sound of TV.
Содержание VR561
Страница 1: ...video cassette recorder user s guide VR561 ...
Страница 30: ......
Страница 38: ......