EN
17
Operating your Receiver
Storing radio stations:
The receiver can store up to 40 radio stations in
memory. You can enter every single radio station
yourself or the receiver can store all available radio
station automatically in an ascending order.
Automatic preset storing
1. Select the band by pressing
FM/AM
on the main
unit or
AM•FM
on the remote control.
2- Press and hold
FM/AM
on the main
unit for 3 seconds.
“MEMORY” will be dis-
played in red and will
blink during the auto-
matic storing process.
Radio frequencies will be scanned and radio station
stored automatically. When all available radio
stations are stored or if all 40 memory locations are
full, the auto preset will stop.
Manual preset
1. Select FM or AM band by pressing
FM/AM
on the
main unit or
AM•FM
on the remote control
repeatedly.
2. Tune to the radio station to be stored. (see
"Manual tuning" on page 16 above for details)
3. Press and hold the
MEMORY
button on the front
panel or
MENU
on the remote control. "MEMORY"
will flash and a preset number will show on the
display.
4. Press
TUNING
UP/DOWN
on the main
unit while MEMORY is
still flashing to select the
desired preset memory
location.
5. Press the
MEMORY
button on the front panel or
the
MENU
button on the remote control to store fre-
quency in selected preset location.
6. Repeat steps 1-5 to store other frequencies.
FM/AM
TUNING
MEMORY
SOURCE
NOTE
Weak signal can affect the "Automatic Preset
Storing function" efficiency. Adjust the antenna
for the best reception for more efficient search.
FM/AM
TUNING
MEMORY
SOURCE
FM/AM
TUNING
MEMORY
SOURCE
OPEN/CLOSE
M/AM
TUNING
OK
MEMORY
SET
OPEN/CL
FM/AM
TUNING
OK
MEMORY