16
Operating your Receiver
Operating the Radio
The receiver has a built-in tuner that allows for
FM/AM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press
SOURCE
or keys on the main unit
to switch on the receiver from Standby Mode. If
using the remote control, press
ON/OFF
or one of the
source keys to switch the unit on.
3. Press
SOURCE
or keys on the main unit
or
AM•FM
on the remote control to enter TUNER
mode.
4- To select band, press the
FM/AM
button on the
main unit or
AM•FM
on the remote control to tog-
gle between AM/FM mode.
5- Tune the stations by pressing
TUNING UP
or
DOWN
on the main unit or
REVERSE
or
FORWARD
on the remote control repeatedly until the desired
station is found.
Alternatively, you can press and hold the respective
buttons for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details).
Selecting Mono or Stereo Sound
Press
ST/M
on the main unit or the
DIGITAL
button
on the remote control to toggle between mono and
stereo sound in FM tuner mode (when available).
FM/AM
TUNING
MEMORY
SOURCE
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
FM/AM
SOURCE
OPEN/CL
FM/AM
TUNING
OK
MEMORY
FM/AM
TU
SOURCE
TUP
TEST TONE
EQ
DIGITAL INPUT
ST/M
SURR. MODE
DSP MODE