Operating Your Receiver
EN
13
Operating Your Receiver
DVD / VCD / CD / mp3
• Unit in DVD, VCD, CD or mp3 mode.
D I G I TA L
• Audio output is in Dolby Digital mode. (For DVD only)
PROLOGIC II
• Audio output is in Dolby PL II Movie, Dolby PL II Music
or Dolby Prologic Emulation mode.
DTS
• Audio output is in DTS mode. (For DVD input only)
RDM
• Random playback mode activated.
• Currently in playback mode.
• Currently in pause mode.
• Parental lock is on and a password is required to view
DVD above a specific rating level.
TTL
• Title number for DVD playback.
TRK
• Track number being played.
CHAP
• Chapter number for DVD playback.
PROG.
• Program mode is activated.
TUNED
• Tuner station detected.
ST
• Tuner stereo signal detected.
REPEAT / REPEAT TRACK / REPEAT CHAP /
REPEAT A.B. / REPEAT FOLDER (mp3 only)
• CD, mp3 and DVD in repeat mode.
KHz / MHz
• Tuner frequency unit.
• Speaker Icons.
SLEEP
• Sleep mode is activated.
• Display disc information
• Larger number refers to the current disc being played.
Switching on /off
• To switch on the receiver, press
ON/STANDBY
on the
receiver once to wake up from standby mode. Press one of
the source buttons or
ON/OFF
on the remote control to
turn on the receiver.
• When the receiver is on, press
ON/OFF
on the remote or
ON/STANDBY
on the receiver to return to the standby
mode.
Selection of Audio/Video source
When one of the audio/video source is selected, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
Example 1:
If you connect a VCR player to the VCR input on the
receiver and press
SOURCE
until “VCR” shows on the dis-
play. You will be able to have the signal from the VCR.
SUBWOOFER
AUX 2
VCR
AUX 1
SAT.CABLE
12
Display
C
3
12345
DISC
SUBWOOFER
Note
:
Your receiver has a 2-week back up memo-
ry to avoid losing settings such as preset
radio stations in case of power outage.
SUBWOOFER
RTD255-EN receiver 5/17/04 9:16 AM Page 16
