EN
5
Display Settings
Display
Showing Demonstration
Not operational in CD mode. Press
DIMMER•DEMO
/ CD INFO
to turn on/off demonstration mode. The
demonstration scrolls through all display operations.
Display Clock / Timer
Setting the Clock
1. Press
and
hold
CLOCK
until the hour flashes on
the display.
2. Press
DIGITAL TUNING
or to set the
hour and then press
CLOCK
to shift to minute
digits.
3. Press
DIGITAL TUNING
or
to set the
minute.
4. Press
PROG•SET
to save settings and
STOP
to
quit setting.
Setting the Timer
1. Press
and
hold
TIMER
until the
ON
appear with
the hour flashing (
ON
- timer on time )
2. For setting time, press
DIGITAL TUNING
or
to set the hour and then press
TIMER
to shift
to minute digits.
3. Press
DIGITAL TUNING
or to set the
minute.
4. Press
TIMER
to change to
OF
(timer off time)
with hour flashing. Repeat steps 2 & 3 for timer
off time setting.
5. Press
PROG•SET
to save settings or
STOP
to
quit setting.
Activating the Timer
Press and release
TIMER
to turn on/off the timer. The
timer is active when the clock icon is lit.
Adjusting the Display Brightness
1. Press and hold
DIM
MER•DEMO / CD
INFO
for more than 2
seconds.
2. While the dimmer is displayed, press and
release
DIMMER•DEMO / CD INFO
repeatedly
to select the desired level (DIMM 1 - 3).
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. Press
SLEEP
on the
remote to select among OFF, 90, 60, 45, 30, 15 and 5
minutes. (Remote Only)
The sleep icon flashes on the display when sleep
mode is activated.
When sleep is activated, press
SLEEP
once to view
remaining sleep time.
Press
SLEEP
again when the remaining sleep time is
displayed to change sleep time.
BASS
SURROUND
DIMM 2
Note
:
When system is ON, you can press
CLOCK
to display the current time
for about 2 seconds.
Note
:
Sleep is automatically de-activated
when the unit is turned off.
Note
:
The wake up timer source will be
the source you are in when set-
ting the timer.
A_RS2650-EN 4/7/05 9:54 AM Page 9
