EN
8
Radio
Selecting Tuner Band
1. Press
SOURCE
to select
TUNER
.
2. Press
BAND
to select between AM or FM radio
band.
Tuning to a Station
Press SKIP BACKWARD / SKIP FORWARD to
select frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press
TUNE•PRESET
to toggle TUNE and PRESET
mode.
• Press SKIP BACKWARD or SKIP FORWARD
on the main system or
PRESET UP
or
DOWN
on
the remote control to access the previous or next
preset station. The display first shows the preset
program number and after a few seconds, the
frequency will be displayed. (FMPR:01 is FM
preset 1)
Auto Preset Programming
(FM only)
Press and hold
BAND
button for 2 seconds to scan
stations in FM band. The stations will then be stored
as preset channels. A maximum of 32 stations can be
stored. Beware of your preset channels being erased
accidentally because the scanning and storing
process is automatic upon pressing the button. You
can stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press
TUNE•PRESET
button to enter TUNE mode.
2. Press SKIP BACKWARD / SKIP FORWARD
to access the desired frequency.
3. Press
the
PROG•SET
button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP BACKWARD / SKIP FORWARD
to move to the desired preset number (1-32).
6. Press
PROG•SET
to store the selected frequency
at that preset.
Suppressing Stereo Signal
Press
FM ST.
to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
AUTO
87.50 MH
z
PR:01
Tips
:
Your audio system has 32 preset sta-
tions.
A_RS2650-EN 4/7/05 9:54 AM Page 12
