Compatible iPod, iPhone and iPad models
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generation)
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPad 2
• iPad
Note:
If your iPhone is called w
hile it is docked, playback will be paused.
inserting your iPod / iPhone / iPad
1. Insert your iPod / iPhone / iPad into the connector in the dock.
2. Press the
oN/oFF
button to turn on the unit. Ensure the iPod / iPhone/ iPad / LINE IN source is selected (the FM
RADIO indicator should be off) - to select a source, tap the
SoURCE
button. Ensure you do NOT have a device plugged
in to the LINE IN jack.
Note:
• The iPod / iPhone / iPad will charge automatically (until fully charged) once it is docked in the cradle (except if the
unit is in Radio mode). iPod Classic (1G and 2G) will not charge.
• Note that not all functions of some iPod / iPhone / iPad models can be controlled via the remote control of this unit.
If necessary, operate your iPod / iPhone / iPad directly by using its screen.
• When playing iPod / iPhone / iPad, you can use the
MENU
, , or
SELECt
button on the remote control to enter the
menu of iPod / iPhone / iPad to select.
• Disconnect the Line-in cable when playing iPod / iPhone / iPad.
Pausing playback
• Press the
button.
• To resume playback, press the
button again.
Skipping to another track
• Press either the
or button according to the desired direction.
• Press the
button to skip to the beginning of the current track or previous track. Press
button to skip to the
beginning of the next track.
Locating a particular point on a track
• Keep either the
or
button pressed during playback and release at the desired point in the track.
Note:
Please refer to the user’s manual that was included with your
iPod / iPhone / iPad
for more details.
LiStENiNG to yoUR iPod / iPhone / iPad
WARNiNG:
•
NEVER
pull iPod / iPhone / iPad forward or push
backward. This can damage the unit and your
iPod / iPhone / iPad.
• If using an iPod / iPhone / iPad with a cover or
"skin", please remove it before docking.
- 4 -
PoWER SUPPLy
Using the AC adapter
Using an AC adapter other than the one supplied with the unit may damage the unit.
Caution:
• Before use, ensure the rated voltage of the adapter matches your local voltage.
• The included AC adapter is for use with this unit only. Do not use it with other
equipment.
• If you are not going to use the unit for a long time, disconnect the AC adapter
from the wall outlet.
• Whenever the AC adapter is plugged in to a wall outlet, electricity is running
through the unit, even when the power switch is turned off.
Removing the base stand
Hold the unit and slide down the stand (as shown).
installing the base stand
Hold the unit and push the stand upward the rear of unit (as shown).
Caution:
Before removing or installing the base stand, ensure you disconnect all
cables (AC adaptor and Line -in cable).
Mounting on a wall
The unit can be mounted on a wall by the mounting holes on the rear of the unit.
Caution:
• Mounting the unit requires special skills that should be only performed by qualified
personnel.
• Make sure that the wall mount is fixed securely enough so that it meets safety
standards.
iNStALLAtioN
EN
AC adapter
to AC outlet
to “DC iN 9V” jack
Back view
Two mounting holes
[Use #4 (Imperial) or M3 (Metric)
pan head screws - not supplied]
6.5”
RPD160A_UL_BK_20110718.indd 4
7/22/2011 10:35:15
