EN
EN
Operating the Clock Radio
Sleep Mode
In sleep mode, the radio or CD will turn
off automatically. Simply:
1. Listen to CD or radio.
2. While holding
SLEEP
, press
REV
or
FWD
to set the sleep time. The time
range is from 1 minute to 2 hours.
3. Release
SLEEP
and the current time will
be shown again. The radio or CD will turn
off when the preset time elapses. If you
decide to turn off the radio or CD sooner,
press
SNOOZE
or
OFF
.
4. When
SLEEP
is activated again, the sleep
time will be the same as the one you have
set before.
5. Press
SLEEP
to read the remaining sleep
time.
Nap Mode
This function wakes you up after a short
period of time. Simply:
1. Press
NAP
and release. The
indica-
tor will flash. During this period, adjust
NAP time by pressing
REV
or
FWD
.
The range is from 10 minutes to 2 hours.
2. The clock will be shown after 5 seconds
if no button is pressed. The
indicator
will lit up.
3. Press
NAP
once to show time left.
Stop the Nap alarm
Press
NAP
or follow “Turning off Alarm”.
1. Press and hold
NAP
to cancel the nap
setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with
GRAD-U-
WAKE
feature.
Turning off Alarm
Silence the alarm momentarily
Press
SNOOZE
. The alarm will sound again
when the snooze period is over. (See
“
Snooze Alarm Operation
”).
Stop the alarm
Press
OFF
. The alarm will sound on the
following day at the same time.
Disable the alarm permanently
1. Press
CANCEL
.
2. The
WAKE
indicator will be flashing.
3. Press
WAKE 1
or
WAKE 2
within 3 sec-
onds to deactivate the corresponding
alarm function permanently.
7
6
Operating the Alarm
Setting the WAKE Time
Your digital clock operates on a 12-hour
standard mechanism.
1. Press the
SET
button until WAKE 1 /
WAKE 2 icon is blinking.
2. Press
REV
or
FWD
to set the wake
time. The time decrements or increments
will follow by a faster rate when you press
and hold either
REV
or
FWD
.
3. After the WAKE time is set, press
SET
repeatedly until no icon is blinking.
Note:
Note:
Note:
Note:
Note:
When you turn off the alarm by
pressing
OFF
OFF
OFF
OFF
OFF
, the alarm will
turn on at the same time on the
following day.
Tip:
Tip:
Tip:
Tip:
Tip:
The unit equips with
GRAD-
GRAD-
GRAD-
GRAD-
GRAD-
U-WAKE
U-WAKE
U-WAKE
U-WAKE
U-WAKE
feature, the alarm
tone volume will increase
gradually to its maximum in
about 30 to 45 seconds.
Tip:
Tip:
Tip:
Tip:
Tip:
If you set the SLEEP
function with low volume level
before going to bed, we
advise using WAKE mode
to wake you up since its volume will
automatically increase.
Waking by Selected Source
You may be woken up by WAKE , RADIO
or CD
.
1. Select an AM or FM station.
2. Set wake time (see above directions).
3. Press
WAKE 1
or
WAKE 2
to select wak-
ing up by WAKE , RADIO or CD .
Corresponding indicator will be shown
next to the selected setting.
4. Adjust the volume by turning
VOL
.
You can select your CD wake track by the
following procedures.
1. Make sure you have inserted a CD.
2. While holding
WAKE UP CD TRACK
,
press
REV
or
FWD
to select your
desired CD wake up track.
Tip:
Tip:
Tip:
Tip:
Tip:
You can activate the previously
set alarm time by pressing
WAKE 1
WAKE 1
WAKE 1
WAKE 1
WAKE 1
or
WAKE 2
WAKE 2
WAKE 2
WAKE 2
WAKE 2
.
RP5610_EN(US)
4/10/06, 2:14 PM
8-9
