RCA RP3715 EN-US, Руководство пользователя

Страница: 8 / 9

6
Operating the Clock
Nap Mode
This function wakes you up after a short
period of time. Simply:
1. Press NAP and release. The green NAP
indicator will flash. During this time
period, adjust NAP time by pressing
REV
or FWD . The range is from 10 minutes
to 2 hours.
2. The clock will be shown after 5 seconds
if no buttons are pressed. The NAP
indicator will lit up.
3. Press NAP once to show time left.
Stop the Nap alarm
Press NAP or follow “Turning off Alarm”.
Notes:
1. Press and hold
NAP to cancel the
nap setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with
GRAD-U-WAKE feature.
4. If the radio is currently on, then
the radio will be on after NAP is
pressed.
Turning off Alarm
Silence the alarm momentarily
Press SNOOZE . The alarm will sound again
when the snooze period is over. (see
“
Snooze Alarm Operation ”).
Stop the alarm
Press ON/OFF . Then, the alarm will be on
the following day at the same time.
Disable the alarm permanently
Press CANCEL then press WAKE1 or
WAKE2 until the WAKE indicator
diappears.
Snooze Alarm Operation
This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing
SNOOZE until the snooze pe-
riod is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm
conditions are met. Set the “quiet” as fol-
low:
1. Press and hold SNOOZE .
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes)
from 1 minute to 30 minutes. Release
button, then, the “quiet” period is set.
Seconds Time Display
The unit may display in seconds.
1. Select LOCK in the function selector.
2. Press REV or FWD to show seconds dis-
play.
3. Release REV or FWD to return to the
hour and minute display.
EN
RP3715 EN-US 6/21/01, 12:05 PM 7