4
Operating the Clock
Setting Clock Time
Your digital clock operates on a 12-hour
standard mechanism. A green indicator
will be shown below to
AM
when the unit
is reading AM time.
1. Slide the function selector to
CLOCK
.
2. Press
REV
or
FWD
to set the clock time.
When you press and hold
REV
or
FWD
,
the time decrements or increments will
follow by a fast rate. No adjustment
can be made when
mode is selected.
Setting the Wake Time
This clock radio has two separate alarms.
You need to set each of them individually.
1. Slide the function selector to
WAKE 1
or
WAKE 2
.
2. Press
REV
or
FWD
to set the wake time.
The time decrements or increments will
follow by a fast rate when you press and
hold
REV
or
FWD
.
3. Wake time is set. A green indicator is
up on the left-hand side when
WAKE 1
is activated while on the right-hand side
when
WAKE 2
is activated.
4. To disable
WAKE
function, press and
hold
WAKE 1
or
WAKE 2
button until
the indicator disappears.
Cancel Wake Function
1. Press
CANCEL
2. Press
WAKE1
or
WAKE2
button to
disable the wake function.
Note: The unit equips with
GRAD-U-
WAKE
feature, the alarm tone vol-
ume will increase gradually to its
maximum in about 30 to 45 seconds.
Auto Dimmer
Slide the
AUTO DIMMER
switch at the back
of the unit to
ON
.
The brightness of the
LED display will vary automatically
according to the environment.
Slide to
OFF
, the display will maintain at
the brightest level.
EN
CLOCK
WAKE 1 WAKE 2
WAKE 1
WAKE 2
NAP
SLEEP
PRESS HOLD TO CANCEL
REV
FWD
ON/OFF
CANCEL
SNOOZE
V O I C E
ON
OFF
AUTO DIMMER
RP3715 EN-US
6/21/01, 12:05 PM
5
