3
Have a Blast—
Just Not on Your Eardrums
Make sure that you turn down the
volume before you put on the
headphones; then increase the
volume to the desired level after they
are in place.
First Things First
step 4: system hookup
Speakers
Connect the wires from each speaker to one set of terminals.
1.
Press down on the tab to open the red terminal, and insert
the red wire (+) into the red terminal.
2.
Press down on the tab to open the black terminal, and insert
the black wire (–) into the black terminal.
When connecting the speakers, make sure the bare end of each
wire makes contact with the metal grips inside the terminal.
Antennas
The AM antenna is built in, so you don’t need to install it.
The FM wire antenna connects to either of the FM ANTENNA
terminals on the unit’s back panel. Connect the FM antenna wire
the same way you connect the speakers.
After connecting the FM antenna, extend it to its full length; then
you can adjust its position for better reception when you are
listening to the radio.
VIDEO/AUXILIARY Components
Use the AUX input jacks on the back of the unit to add an
additional source of sound into your system.
To hook up an auxiliary component, match the left and right
output plugs from the component to the left (L) and right (R) AUX
input jacks on the back panel.
AC Power
Plug the power cord into an AC power outlet that accepts the
polarized plug which has one blade wider than the other.
The
Standby Indicator Light
lights to let you know that the unit
is plugged in and ready to use.
Headphones
To listen to your stereo with headphones (not included), use the
3.5 mm PHONES jack on the front of the unit.
Speaker Hookup
+
–
R
L
8
Ω
SPEAKERS
Antenna Hookup
Or
R
R
L
L
FM ANTENNA
300
Ω
Video/Auxiliary
Component Hookup
Содержание RP-9340
Страница 1: ...USER S GUIDE AUDIO SYSTEM RP 9340 ...