10
General CoNtrols
Open/close
This button allows you to open and close the CD
compartment door.
INTRO
This feature allows you to listen to the first 10
seconds of each track on the disc in the play
position.
power
This button allows you to turn the system on and
off. When turned on, the system will default to the
last active mode.
NOTE:
You can also turn the system on by pressing
any one of the function buttons.
PAUSE
This button, located below each tape deck, allows
you to temporarily suspend tape activity.
PLAY/PAUSE
This button, located to the left of the display,
controls CD activity. Press once to begin CD play,
again to pause play and a third time to resume play.
PRESET/TUNE
This button is active only in the TUNER function.
Press to toggle between Preset and Tune mode.
Using the (>> or <<) buttons, scan through the
preprogrammed frequencies or those on the active
band to select the radio station you want to hear.
REC
This button is located below the left cassette door.
Press to record from CDs, other tapes, the radio or
an auxiliary component.
REPEAT
In the CD mode, you can repeat an entire disc, a
programmed list or a certain track.
REW
This button winds the tape back toward the
beginning.
SEEK/SCAN
These features are active only in the TUNER function
in the FM band. Press once to activate the Seek
mode. The system will stop tuning on the next
available FM frequency. Press and hold the button
momentarily to activate the Scan mode. The system
will stop for approximately five seconds at each of
the FM stations received until the button is pushed
again.
SET/demo
This feature allows you to store preset radio stations
or programmed track lists in the system’s memory.
This works in both the CD and TUNER functions. It
also allows you to set the clock and timer.
SHUFFLE
This feature allows automatic random play of all
discs and all tracks.
STOP
This button, located to the left of the display, ends
CD activity.
STOP/EJECT
On systems with mechanical cassette decks, this
button is located below each cassette door for tape
activity. Press to stop current tape activity, or to
open the cassette compartment door when no
buttons are active. There is also a STOP button
located in the Master Controls to the left of the
display that is active only in the CD function. Press
once to end CD activity.
TRACK/SEARCH
These buttons are active in the TUNER and CD
functions. In the CD function, they allow you to
search through a track while it is playing or skip
through the tracks of the current disc. In the TUNER
function, they allow you to do a fast or slow search
incrementally through the band or presets.
VOLUME
Use this dial to regulate the level of sound output
from the system. Turn the dial to the left to lower
sound output. A message will continually run across
the display when the sound is muted. Turn the dial
to the right to increase sound output. The volume
indicator in the display will show the level of sound
output from minimum to maximum.
