RCA RNSM4003, Руководство пользователя

Страница: 19 / 82

17
Input Setup
Press input key on the remote control to enter "INPUT SOURCE" menu. There are these
options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2",“USB".
Use ◄ / ► key to select a input source and press Enter key to confirm.
Channels Selection
There are four ways to select channel:
1) Using number keys, and ENTER keys on the remote control to select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select channels that were either erased
or not memorized.
2) Using CH key on the remote control or on your TV to select channel.
When you press the CH key, the TV changes channels in sequence.
You will see all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press key to return to previous channel, press it again to return to current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number keys to select the second channel. Then use the button to quickly
alternate between them.
is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channels List" or "Favorite List".
Press ENTER key to choose from "Channel List" menu.
.
9
0
ENTER
Volume Adjustment and Mute Setup
Volume adjustment
Press VOL+/-key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL+/- key:
Input Source
TV Component HDMI1 HDMI2 USB AV