EN
Editing program
Overwriting Programmed
Tracks
1. In stop mode, press and hold
MODE
to enter program mode.
2. Press
MODE
repeatedly to select the
program location you want to
overwrite.
3. Press
SKIP BACKWARD
( ) or
SKIP FORWARD
( ) to select the
new track you want to store in the
selected program location.
4. Press
MODE
to confirm selection.
5. Repeat steps 2 and 3 to overwrite
additional programmed tracks.
Deleting Programmed Tracks
1. In stop mode, press and hold
MODE
to
enter program mode.
2. Press
MODE
to select the
programmed location and track to be
deleted.
3. Press and hold
DSP
for about 3
seconds to delete the unwanted track
from your program list.
‘ - - ‘ shows on display to indicate
successful deletion.
4. Repeat steps 2 and 3 to delete
additional tracks from the program
list.
5. To cancel editing program, press
OFF /
STOP
( ) once.
The unit will return to stop mode
automatically after 30 seconds if there
is no key activation.
Digital Music Operation
16
EN
Programming Tracks
1. In stop mode, press and hold
MODE
for 2 seconds to enter program mode.
The program mode icon lights on
the display.
The flashing ‘ - -’ is the track selection
and ‘P01’ is the program list position.
(If you have program in your player,
the pre-programmed track number
will be shown.
2. Press
SKIP BACKWARD
( ) or
SKIP
FORWARD
( ) to select a track. The
selected track number flashes on the
display.
3. Press
MODE
to confirm track selection.
4. Press
MODE
again to skip to the next
programming position.
5. Repeat steps 2-4 for further selections.
6. Press
OFF / STOP
( ) to exit
programming mode.
The unit returns to stop mode
automatically after 30 seconds if there
is no key activation.
See “Play Modes” section for more
information on program playback.
Digital Music Operation
15
Note
The player enters Intro Play mode
and plays the beginning of each track
as you scroll through tracks for
programming.
Tip
20 program locations are available
on this unit.
P
- - P 0 1
S o n g I n f o
