1. When the alarm time is reached, the ALARM icon flashes.
2. Either Radio, iPod or Buzzer will sound depending on the mode previously
selected.
3. Press the SNOOZE button
to silence
the alarm temporarily for approximately 9
minutes. The Snooze function is repeatable for the next 120 minutes, The Snooze
` ` icon shows in the display.
4. Press the ALARM button
to cancel the Snooze function and reset the Alarm. The
Alarm icon ` ` turns on. The alarm will sound again tomorrow at the same time.
5. The alarm will be reset automatically after 120 minutes if no
key is pressed.
1.
In mode.
will be shown in the
display.
Press the SOURCE button to select AUX
`
`
2. Connect an audio lead to the Aux In socket on the rear of the unit. Connect the
other end to the headphone or Line Out socket of your auxiliary device.
3. Play the content of your auxiliary device and the sound will be heard through the
speakers of the Clock Radio.
4. Adjust the sound using the volume control wheel on the rear of the unit.
AUX
5
6
1. Carefully dock your iPod into the compartment on the top of the unit.
2. Make sure that you are using the correct dock adaptor for your iPod and that it is
properly docked into the unit. Failure to do so may damage your iPod or the
connecting pins.
3. Press the SOURCE button to select iPod
mode. The iPod icon ` ` will show in
the display.
4. Press the PLAY
/
PAUSE button to play or pause the tracks on your iPod.
5. Press the or buttons to skip to the next or previous track
.
Press and hold
the or buttons to fast forwards or backwards through the
current track.
1. Press the ALARM button to activate or deactivate the alarm mode. When the
alarm is activated, the alarm icon will show in the display.
2
.
If the alarm is set to iPod, the last song selected will play at the set time. If the iPod
is not docked and the alarm is set to iPod mode, the buzzer will sound.
3
.
If the alarm is set to Radio, make sure that the radio is tuned to a station and the
volume is set to a desired level before turning off the unit.
4
.
If the alarm is set to buzzer, the alarm will sound at a preset level.
5
.
Press and hold the
STANDBY button to reset the ALARM function.
Alarm
operation
Aux
i n
mode
Listening
to
your
iPod
Setting
the
alarm
