RCA MR27555, Руководство пользователя

Страница: 22 / 48

20
Using the Remote
Remote Buttons
POWER When in TV mode, turns TV on and off. In VCR or SAT•CABLE
mode, and if programmed, turns on and off most VCRs or Satellite
Receivers/Cable Boxes.
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2•LD Puts the remote in VCR2 mode and if autotuning is enabled,
it will turn on the TV and tune to the correct channel. VCR2•LD can only
be programmed for one component: either a VCR or Laserdisc player.
SAT•CABLE Puts the remote in SAT•CABLE mode and if autotuning is
enabled, it will turn on the TV and tune to the correct channel.
AUDIO Puts the remote in Audio mode.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
REW, PLAY, FF, REC, STOP, PAUSE If programmed, provides transport
control for some remote-controllable VCRs, laserdisc players, tape decks,
and CD players.
DISPLAY Brings up channel information. Also clears menus from the
screen.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time (each press adds another 30 seconds).
CHAN or CHAN Scans up or down through the current channel
list. Press once to change the channel up or down; press and hold to
continue changing channels.
VOL< or VOL> Decreases or increases the TV’s volume.
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
PREV CH Returns you to the previous channel.
(0-9) Number Buttons Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the first
digit, then add the second two. Example: to tune to channel 123, press
and hold 1, press 2, then press 3.
INPUT In TV mode, press to toggle through the available input sources
(VID/SVID and the current channel). In SAT mode, press to select
available channel lists.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver
button in SAT•CABLE mode.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. For RCA, GE and PROSCAN VCRs, this button also clears
items from the VCR clock and timer programs.