8
Clean the player with a soft cloth, or a
damp chamois leather. Never use
solvents.
USEFUL ADVICE
• Do not store CDs in damp areas.
• Do not expose CDs to high
temperatures.
• Do not put any tape or adhesives on
either side of the disc.
• You should avoid leaving the CD
door open. Dust is liable to impair
performance of the laser optical unit.
• Do not use your set immediately
after transport from a cold place to a
warm place : there may be
condensation problems.
• Do not touch the playing surface.
Make sure that you keep your set
away from water and high
temperatures.
• If you do not use your set on battery
power for more than one month, we
advise you to take out all the batteries.
• To prevent personal injury, do not
reverse any battery and do not mix
battery types.
• Discard leaking batteries immediately.
Leaking batteries can cause skin burns
or other personal injury.
• This apparatus shall not be exposed to
dripping and splashing.
• Thomson recommends Duracell Ultra
Batteries.
• Prolonged use of the CD player at full
volume can damage the user’s ear.
SPC
: Sound Pressure Control at 100dB
maximum (only for Thomson models)
Notes on CD-R/RW Discs
• Do not affix any type of labels to
either side (recordable or labeled side) of
a CD-R/RW disc as this may result in the
unit malfunctioning.
• To avoid damages to the CD-R/RW disc,
do not open the disc compartment door
while the disc is being read.
• Do not load an unrecorded CD-R/RW
disc into the unit. This may take a longer
time to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the quality
of the CD-RW disc and the recorder
used to create the disc.
More Information
THE CD PLAYER
EN
EN
Program
This function lets you listen to the tracks
you selected in the order you want. You
can program up to 24 tracks. The CD
player must be in Stop mode.
1. Press and hold
prog•display
to enter
program mode. P icon will appear in the
display.
2. Press or to select the track
to store.
3. Press
prog•display
to confirm your
entry.
4. Repeat steps 2 and 3 to store other
tracks.
5. Press Play/Pause button to listen
to your programming.
Edit Program
To add/edit tracks to the program, enter
stop mode.
1. Press and hold
prog•display
button
to display program information.
2. Press
prog•display
repeatedly to
select the program location to edit.
3. Press or to select the new
track to store into selected memory loca-
tion.
4. Press
prog•display
to confirm your
entry.
5. Press Play/Pause to start pro-
gram playback.
Cancel Program
To cancel your program, press and hold
the
mode
key when you are in the stop
mode. ERASE will appear in the display.
The program will be automatically can-
celed.
Exit Program mode
To exit program mode, press
prog•display
in stop mode.
Note : To prevent excessive battery
consumption, the unit switches off
automatically in all modes after 30s
if no key has been activated.
7
2_RP2441 EN 6/13/02 8:26 AM Page 12
