Resume
When you power off the unit (without
disconnecting power supply), Resume is
automatically activated. It stores the
following settings and modes: Mode
(Repeat/Repeat All/ Random) and EQ set-
ting (Bass Boost). When play mode is on
again, the unit resumes to the settings.
To automatically store current track
when you stop CD play, press
STOP
but-
ton twice.
Repeating/Intro scan
You can replay the entire CD or one
track as many times as you wish as well
as listen to the beginning of each track
for 10 seconds.
Press
mode
successively to
1. Replay the entire CD .
2. Replay the current track.
3. Play the beginning of each track for 10
seconds.(The number of the track being
played will be displayed and SCAN will
display.)
4. Press again to de-select the function.
Random Playback
1. Press Play/Pause on the main unit
or Play/Stop on the remote
control to start playback.
2. Press to activate random play
back function.
3. Press again to cancel the function.
Remain Time
Press
prog•display
on the main unit
when CD is playing to toggle between
displaying track elapse time and disc
remain time.
(Available in normal playback mode
only)
Bass Boost
Press bass boost repeatedly to select
bass boost I and bass boost II.
THE CD PLAYER
Skip /Search
Press to skip to the previous track.
Press and hold to search backwards in a
track.
Press to skip to the next track.
Press and hold to search forward in a
track.
Pause
Press Play/Pause on the main unit
again to pause playback. The minutes and
secondes flash when interrupted
Stop
Press Stop on the main unit or
Play/Stop on the remote control
during playback to end CD playback.
Lock
Slide
control
switch on the main unit to
HOLD
position to lock the button on the
main unit to avoid accidental activation of
unwanted functions.
The hold icon will show on the dis-
play when the controls are locked.
Do the same to lock the buttons on the
remote control.
NOTE: Remember to slide the
CONTROL switch to ON position to
activate the controls again.
Listening to a CD in your car
(For RP2445 / RP2447 only)
1. Select a power source (either battery
power or the car DC adaptor)
2. Insert the cassette adaptor into the tape
deck and plug the cord into the CD play-
er’s HEADPHONES jack.
3 . Insert a compact disc and press
Play/ Pause button to power on the
unit (180 sec ESP). Press and hold
prog•display
while you press Play/Pause
to turn on the unit for 45 sec ESP set-
ting.
Adjust CD player’s volume to a mid level
(make sure the Bass Boost is turned off).
4. Use the car stereo to adjust volume,
tone . Adjust the volume of your CD player
for better volume control.
5. Before ejecting the cassette after you
have finished listening, make sure the car
stereo’s volume is turned down.
THE CD PLAYER
EN
EN
6
5
2_RP2441 EN 6/13/02 8:26 AM Page 10
