3
Find the breaker that controls the
circuit for your doorbell. Turn it off
before you continue installation.
Apply the mounting template sticker to the wall
Align the space marked “Hole A”
on the mounting template with the
access point for the cables that will
power the doorbell camera.
Stick the mounting template sticker to
the wall.
3
~ 4.5 in
~ 1.5 in
Mounting Template
Paste the template on the
required place.Drill screw
holes and cable holes
according to the template.
Hole A:Cable Hole.
Hole 1:Wall Mounting Screw
Hole.
.
.
MOUNT THE DOORBELL CAMERA
Turn off power to your doorbell’s circuit
1
Remove your existing doorbell
2
Carefully remove your existing
doorbell from the wall. Then unhook
your home’s wiring from the doorbell’s
terminals.
Remove &
unhook
Apply
4
Drill holes for the doorbell camera
Drill two holes where
indicated by the mounting
template.
~ 4.5 in
~ 1.5 in
Mounting Template
Paste the template on the
required place.Drill screw
holes and cable holes
according to the template.
Hole A:Cable Hole.
Hole 1:Wall Mounting Screw
Hole.
.
.
Insert one of the drill bits
in your drill—for masonry
or brick, use the larger drill
bit provided. For wood,
the smaller.
—OR—
Drill
Insert
5
Remove the faceplate from the doorbell camera
Before you mount it, take the faceplate off the
doorbell camera—you’ll need access to several
items behind the faceplate during setup.
To remove the faceplate: Push down on the top
and bottom of the doorbell camera and push the
button and just below the camera to remove the
doorbell camera from the faceplate. Be careful not
to touch the camera lens!
continues on the next page...
