RCA HDV5000, Руководство пользователя

Страница: 40 / 62

36 chapter 3
The Menu System
Front Speaker Placement
Alignment
Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not
ahead of them.
Angle
Place the left and right speakers to form a 45-degree angle with your favorite viewing position to
duplicate the soundtrack mixer’s perspective.
Height
The mid- and high-frequency drivers of the three front speakers should be as close as possible to
the same height. This often requires placing the center speaker directly on top (A) or beneath (B)
the TV set.
Preferred Surround Placement
Location
If possible, place surround speakers to either side of the listening area, not behind it.
Height
If space permits, install surround speakers 2-3 feet above viewers. This helps to minimize
localization effects.
Aiming
Aim surround speakers straight across the room, not down at viewers, to help create a more
open, spacious surround sound field.
Alternative Surround Placement
Rear Wall
If rear wall mounting is the only choice, aim the speakers at each other (A), towards the
front (B) or towards the sidewalls (C, D). Experiment with placement until sounds seem to
surround you, rather than come from behind you.
1
1
2
3
3
1
2
3
Courtesy Dolby Laboratories
Courtesy Dolby Laboratories
Courtesy Dolby Laboratories
Speaker Setting
Use this option to select parameters for the analog 5.1 channel output.
• 2ch
Select when a 2 channel stereo system is connected to the player.
• 5.1ch
Select when a 5.1 channel surround system is connected to the player.
When you select 5.1 ch, you can set the speaker sizes, distance to each speaker and the crossover frequency.
Crossovers split the audio signal into separate frequency bands and sends the frequencies to the speakers that
are capable of playing them. For example, if your small speakers can’t play frequencies lower that 80Hz, the
crossover will separate the audio signal so frequencies lower than 80Hz will go to a larger speaker that is capavle
of playing them. You can choose between 80 Hz/100 Hz/120 Hz.
1 Select a speaker by pressing the arrow buttons, and press OK.
2 Select the size by pressing the up/down buttons, and press OK.
menu5.indd 36 3/8/06 4:50:01 PM