background image

4

Your RCA SCT-570 Full Logic Controlled Stereo Cassette Deck combines two auto-reverse cassette decks
for professional-quality dubbing and the convenience of extended play. Its features include:

Auto Music Search (AMS)

 — lets you quickly locate a selection.

Dolby B-C

 Noise Reduction System with Built-In MPX Filter

 — reduces tape hiss and noise for the

best possible audio recording.

Auto Tape Selector

 — automatically adjusts equalization and bias to match the type of tape you use.

Auto-Reverse

 — lets you play or record (Deck II only) both sides of a cassette tape without turning it

over.

Blank Skip

 — skips long blank spaces on the tape.

Relay Play

 — lets you repeatedly play two tapes for hours of continuous play.

High-Speed Dubbing

 — lets you copy tapes at twice the normal playback speed.

Record Mute

 — lets you record a few seconds of silence between selections.

Auto-Stop

 — protects the tape and the playback/record mechanisms by stopping playback or recording

at the end of the tape.

Logic-Controlled Operation

 — gives you error-free, soft-touch control.

Recording Level Control and Two-Channel Peak Level Meters

 — let you control the quality of your

recordings.

Caution:

 Most material on prerecorded tapes is copyrighted. The unauthorized duplication of

copyrighted material is a violation of the copyright laws of most countries and such duplication might
result in fines and imprisonment. Note, however, in the United States, it is not a violation of U.S.
copyright laws for a consumer to use an audio recording device to duplicate musical recordings for
noncommercial (personal) use.

Dolby and the double-D symbol 

2

 are trademarks of Dolby Laboratories Licensing Corporation.

Dolby Noise Reduction manufactured under license from Dolby Laboratories Licensing Corporation.

©2000 RadioShack Corporation.

All Rights Reserved.

FEATURES

Содержание Full Logic Controlled Stereo Cassette Deck





















Отзывы: