11
EN
Pausing Playback (Still Mode)
Press the PAUSE button. To resume
normal playback, press the PLAY button
on the remote control or
button on the
unit.
For a DVD, each time you press the PAUSE
button, the picture advances one frame.
Stopping Playback
Press the STOP button at the location
where you want to interrupt playback. To
resume playback at the position where the
disc was stopped, press the PLAY button
on the remote control or
button on the
unit.
If you press the STOP button twice, the
unit’s memory will be cleared and pressing
the PLAY button on the remote control
or
button on the unit will reset the disc
to the beginning.
Fast Forward/Fast Reverse
1. Press the SEARCH
or SEARCH
button when a disc is playing. Each time
the SEARCH
/
button is pressed,
the playback speed changes in the
following sequence:
2. Press the PLAY button on the remote
control or
button on the unit when
you have reached the desired point to
resume playback at normal speed.
Playing a Disc - Basic Functions
Unit Operation
Turning the unit on
1. Slide the STANDBY / ON switch on the
DVD player to the ON position. Slide the
ON / OFF switch on the monitor to the
ON position.
2. The start-up picture will appear on the
screens.
3. After use, slide the STANDBY / ON switch
on the DVD player to STANDBY (power
off). Slide the ON / OFF switch on the
monitor to the OFF position.
This owner’s manual explains the
basic instructions for operating this
unit. Some DVDs are produced in a
manner that allows specific or limited
operation during playback. Therefore,
this unit may not respond to all
operating commands. THIS IS NOT A
DEFECT. Please refer to the instructions
accompanying the specific DVD in
question for more information about
the options available on that DVD.
“
” may appear on the screen
during operation. A “ ” means that
the desired operation is not permitted
by the unit or disc.
Playing a Disc
1. Slide the STANDBY/ON switch to the ON
position. (Slide the ON/OFF switch on
the monitor to the ON position.)
See CUSTOMIZING THE DVD FUNCTION
SETTINGS before proceeding to step 2.
2. Press the button and hold the front
panel to open the disc door.
3. Hold the disc by its edge and gently
push it onto the spindle, with the label
side facing the front, until you hear a
“click”.
4. Push the disc door gently to close it. It
takes a short while for your unit to load
the disc. After loading, for most DVDs,
the unit will automatically take you
main menu of the DVD or start playing
the DVD.
5. If the unit does not automatically start
playing the DVD, press the PLAY
button on the remote control or
button on the unit.
DRC69707E RCA 3L MTK.indd 11
8/9/2011 14:34:30
