EN - 2
Remote Control
Battery Replacement
When the battery becomes weak, the operating distance of the remote control will be
greatly reduced and you will need to replace the battery.
Note:
• If the remote control is not going to be used for a long time, remove the battery to
avoid damage caused by battery leakage corrosion.
• When discarding batteries, environmental problems must be considered and local rules
or laws governing the disposal of these batteries must be strictly followed.
WARNING:
• Do not dispose of the battery in a fire or it may leak and/or explode.
• Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Remove the plastic sheet
before operating the
remote control.
To Change Remote Battery
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When there is a strong ambient light
source, the perform ance of the infrared
REMOTE SENSOR may be degraded,
causing unreliable operation.
