
To connect your camcorder to a TV without audio/video inputs, you will need an
optional
RF output adapter and an optional coaxial RF cable, such as
or
shown on page
3. If your TV has
AUDIO
and
VIDEO
IN jacks
(or is connected to a VCR),
refer to pages
46-47.
VHF
O p t i o n a l
Transformer
( S u c h a s 1 9 3 9 8 3 )
O p t i o n a l C o a x i a l
RF Cable
(such as
or
B a c k o f T V
Connector
S w i t c h
RF Output Adapter
Installation
1 Disconnect the VHF antenna from
your TV. Connect the antenna to the
FROM
ANT connector on the RF
output adapter if you are going to leave
the adapter connected to the TV.
Note: If your
antenna is the flat
twin-lead type attached by two screws,
you
also need an optional
ohm
transformer,
such
as
193983 shown on
page 3.
48
O U T , VIDEO
Jacks
2 Attach one end of the optional coaxial
RF cable to the
OUT TO
TV connector
on the adapter, and attach the other end
to the VHF input on your TV as
shown.
Note:
If your TV has 300 ohm screw
terminals, you will need a
ohm
transformer, such as
1,
shown on
page 3.
3 Attach the RF output adapter’s plug to
the
AUDIO, RF DC OUT,
and
VIDEO
jacks located under the small cover on
the back of the camcorder.