RCA CC800 Скачать руководство пользователя страница 27

Страница: 27 / 68

Using the Battery to Power Your Camcorder

Battery Warning

The battery warning will appear and flash

in the camcorder’s viewfinder when the

battery needs to be recharged.

When this indicator appears, place the

POWER

switch in

OFF

to turn off the

camcorder before replacing the battery.

After replacing the battery, place the

POWER

switch in

to place

the camcorder in record pause.

The battery warning will not be recorded
on the tape when it appears in the

viewfinder.

Battery Warning

in Viewfinder

Battery Care and Storage

Recharging takes approximately 70

minutes depending on the battery’s
condition.

Refreshing takes approximately 210

minutes depending on the battery’s
condition.

After repeated charging and use,
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.

If the battery discharging must be
stopped in the middle, remove the
battery from the adapter/charger before
unplugging it from the AC outlet.

Let a hot battery cool down before

attaching it to the adapter/charger.

The battery will also provide better

service if its power is completely.
drained before storing it for long
periods of time (30 days or more).

The battery should be charged in the
temperature range of

to prevent damage.

. Do not. operate the battery at

temperatures below 32°F (OC) or above

104°F (40C). The battery may be

damaged if operated at temperatures

above 122°F (50C). Operation time

will decrease at extremely low

temperatures.

Store the battery at normal room

temperature.

1 9

Содержание CC800





































































Результаты поиска

Содержание CC800

Отзывы:

Бренды по названию

Популярные бренды

RCA CC800, Руководство пользователя

Результаты поиска

Содержание CC800

Отзывы:

Бренды по названию

Популярные бренды