Using the
Optional
RCA DC Car Cord Adapter
The optional
DC car cord allows you to power
your
truck, or RV. I
from the cigarette lighter socket of a car,
converts
to a 6-volt output.
Notes:
Consult
installation and operating instructions enclosed
with the
for complete operating instructions.
to power the camcorder, your vehicle’s
Cautions: The DCC07 is designed to be used only with
vehicles having negative ground electrical systems.
Use only RCA car cord adapter DCC07 or car cord
adapter/charger
with this camcorder. Use of any
other car cord adapter may damage the camcorder and void
your warranty.
Attaching
RCA
DC Car Cord Adapter
Cigarette Lighter Socket
Optional DCC07 Car Cord Adapter
A DCC07 DC Car Cord Adapter to
I.
2 .
3 .
4 .
.
8
If the batte
is attached to the camcorder, remove it.
Make sure t e camcorder’s power is turned off. Slide the
POWER
SW
tch to turn off the camcorder. The
POWER
indicator wi I turn off.
Attach the p wer connector as shown above.
Take the ve icle’s cigarette lighter out of the socket.
Start the ve icle’s engine.
Caution:
prevent blowing the fuse in the car cord’s plug,
be sure to
rt the vehicle’s engine before inserting the plug
into the cig
lighter socket. If it becomes necessary to
replace the ar cord’s fuse, be sure to use a replacement fuse
with the exact current rating (amps).
6 .
7 .
Insert the car cord’s cigarette lighter plug into the vehicle’s
cigarette lighter’s socket. The
POWER
indicator on the car
cord adapter should light.
Slide the camcorder’s
POWER
switch to turn on the
camcorder. The
POWER
indicator will light.
