10
TUNER
1. Press
TUNER
to select the radio.
2. Press
TUNER
again to select the next radio band.
Choices are:
AM/FM/FM Stereo (RS models)
FM/MW/LW, RDS (ALTIMA models)
The tuner can be either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
Tuning to a Station
1. Press
PRESET/TUNE
to
select TUNE mode.
2. Either rotate the jog or
press
INCREASE or
DECREASE
to tune in the desired station.
Using Presets
1. Press
PRESET/TUNE
to
select
PRESET
mode.
2. Press
DECREASE or
INCREASE
, or rotate
the jog to access the
previous or next preset station. The display first
shows the frequency, and after a few seconds, the
program number. (FMPR:01 is FM reset 1)
Auto Preset Programming
Press and hold TUNER button for 2 second to scan sta-
tions in the selected band. The stations will then
stored as preset channels. Maximum 32 stations can
be stored. Beware of your preset channels being
erased accidentally because the scanning and storing
process is automatic upon pressing TUNER button.
You can stop the automatic scan by pressing TUNER
button, but the erased stations cannot be recovered.
Setting Presets
1. Press
PRESET/TUNE
to access
TUNE
mode.
2. Press
INCREASE or DECREASE
, or rotate the
jog to access the desired frequency.
3. Press the
SET
button once.
4. The most recently accessed program location will
be displayed together with a blinking program icon
(AMPR, FMPR, or LWPR.)
5. If a different program location is preferred, press
INCREASE or DECREASE
to move to the desired
preset number (0-32).
6. Press
SET
to store the selected frequency at that
preset.
Seeking/Scanning for a Station
To seek the next station (ascending), press
SEEK/SCAN.
To scan (ascending) to the next station, stop and play
for 5 seconds and then continue scanning, press
SEEK/SCAN for more than 2 seconds. Scanning contin-
ues until you press another button.
Suppressing Stereo Signal
Press FM STEREO to toggle between FM mono and
stereo for stereo FM stations.
FM(MHz)
AM (kHz)
MW(kHz)
LW(kHz)
FMPR:01
87.50 MH
z
REPEAT
INTRO
SHUFFLE
ATS
PHONES
FM STEREO
POWER
SURROUND
BASS BOOST
ALARM/CLOCK
DISPLAY/DEMO
HELP MODE
S O U N D S Y S T E M
KEVLAR
Tip: Your audio system has several preset stations.
Tip: Press and INCREASE or
DECREASE for more than 1second to
automatically tune up/down the band
for the next station.
Factory Presets
GB
87.50
90.10
98.10
106.10
107.9
520
600
1000
1400
1710
522
603
999
1404
1611
150
170
200
270
283
UG-2501 rev 1 9/2/99 3:24 PM Page 13