Y
75OHM
ANTENNA
INPUT
S-VIDEO
C b
C r
AV
OUTPUT
YUV
INTPUT
AV
INPUT2
AV
INPUT3
VIDEO
AUDIO-L
AUDIO-R
VIDEO
AUDIO-L
(MONO)
AUDIO-R
VIDEO
AUDIO-L
AUDIO-R
Rear panel
Side AV input
(AV IN1)
V
IDE
O
AV IN 1
A
U
D
IO
L
(M
O
N
O
)
R
2.3
TV + VCR + DVD CONNECTION
Connect the audio cables (white and red) to the R and L AUDIO jacks on the TV and the Audio output
jacks on the VCR (or other component). Match the cable color to the jack color.
If your component has Component Output jacks YUV (Y, Cr, Cb), connect three video grade cables to
the Y, Cr, Cb jacks on the component and to the Y, Cr, Cb jacks on the TV. If your component doesn
’
t
have these jacks, go to the next step.
If your component has an S-VIDEO jack, connect an S-VIDEO cable to the S-VIDEO jack on the back
of the TV and to the S-VIDEO jack on the component. If your component doesn
’
t have an S-VIDEO jack,
go to the next step.
Connect a video cable (yellow) to the VIDEO INPUT jack on the TV and to the VIDEO OUT jack on your
VCR (or other component).
Turn on the TV and the component.
Press the TV/AV button repeatedly until the correct video input channel appears in the upper right corner
of the TV screen. For front inputs choose AV1, for rear AV inputs choose AV2 or AV3. This model has
component jacks (Y, Cb, Cr), choose YUV as your video input channel.
Notes:
Use either S-VIDEO jack or VIDEO INPUT 3 jacks. Do not use both at the same time for the same piece
of equipment. This would interfere with the picture display.
S-VIDEO and AV INPUT 3 are sharing the same audio input.
YUV INPUT and AV INPUT 2 are sharing the same audio input.
The basic component (VCR, DVD player etc.) to TV connection is described below. For other hookup, refer
to your component
’
s instruction manual.
8
2.
CONNECTIONS