2
Ring Delay
This feature lets you select the number of times you want the phone to ring
before the answering system answers a call.
From the Answering System Menu:
1. Press the
VOL
(- or +) button to scroll to the
Ring Delay
.
2. Press SELECT soft key.
3. Use the
VOL
(- or +) button to scroll to your selection, from 2 rings to 6
rings or toll saver, and use the
DIR
or
CID
button to toggle between L1
and L 2.
4. Press the SELECT soft key to save your selection and “
Saved”
shows in
the display.
NOTE: When the Toll saver is selected, the unit will answer the incoming call
after 3 rings if there is new message. Otherwise, the unit will answer the
incoming call after 5 rings.
Message Length
From the Answering System Menu:
1. Press the
VOL
(- or +) button to scroll to the
Message Length
.
2. Press SELECT soft key.
3. Use the
VOL
(- or +) button to scroll to your selection, from 1 to 3
minutes, and use the
DIR
or
CID
button to toggle between L 1 and L 2.
4. Press the SELECT soft key to save your selection and “
Saved”
shows in
the display.
Call Screening
From the Answering System Menu:
1. Press the
VOL
(- or +) button to scroll to the
Call Screening
.
2. Press SELECT soft key. Use the
VOL
(- or +) button to select
On
or
Off
.
3. Press the SELECT soft key to save your selection and “
Saved”
shows in
the display.
Message Alert
This feature set your answering system to give an alert tone every 10
seconds when there are new messages.
From the Answering System Menu:
1. Press the
VOL
(- or +) button to scroll to the
Message Alert
.
2. Press SELECT soft key. Use the
VOL
(- or +) button to select
On
or
Off
.
Default is
On
.
3. Press the SELECT soft key to save your selection and “
Saved”
shows in
the display.
Programming the Telephone
