23
Programming the Handset
Global De-Registration
If one or more handsets becomes lost, you should de-register all handsets to ensure proper system
operation. Follow the steps below to de-register all remaining handsets at the same time.
WARNING:
It is not recommended that a handset be de-registered unless absolutely necessary
because once a handset is de-registered, that handset’s telephone features cannot be used until
the handset is re-registered.
1. Press and hold the page button on the base until the home indicator on the base flashes.
2. Press and hold the page button on the base again until the home indicator on the base flashes
rapidly.
3. Press and release the page button on the base once. All handsets and the docking station are de-
registered.
HANDSET NEEDS REGISTRATION
shows in the handset display, and
DOCKING NEEDS
REGISTRATION
shows in the docking station display.
Default Setting
As you become familiar with this system, you may prefer to use the system’s original settings. Follow
the steps below to return to the factory default settings.
1. Make sure the cordless handset is
OFF
(not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol
or
buttons to scroll to
HANDSET SETUP
.
4. Press prog/mute button to confirm.
5. Press the CID/vol
or
buttons to scroll to the
DEFAULT SETTING
menu.
6. Press the prog/mute button to enter the menu.
DEFAULT SETTING 1YES 2NO
shows in the display.
7. Use the touch-tone pad on the handset to select
1
or
2
, or use the CID/vol
or
buttons to
scroll to your selection.
2NO
is the default setting.
NOTE:
If you choose “YES” all the settings in the programmable menu are returned to factory
default setting.
8. Press the prog/mute button to save your selection. You will hear a confirmation tone.
