23
To pre-record an outgoing message you must first follow the
procedure to set the answer mode.
Record a personalized outgoing message
* You can choose to replace the predefined OGM with your own pre-
recorded personalized messages.
1. Repeat steps 1 to 4 on Set the Answer mode section.
2. Display shows Select mess. > Predefined
3. Press the Navigation (
or
) button to select Personalized and press
the MENU/OK button.
4. Display shows > Play message
5. Press the MENU/OK button to play the existing message
6. Press the Navigation (
or
) button to select Record Mess. and then
press MENU/OK button to record a new message
7. Display shows > Record mess.
8. Speak clearly into the handset; press the MENU/OK button to end the
recording. Your message will be played back automatically.
9. Display shows Select mess. > Personalized
10. If you are not satisfied with the result, repeat f r om step 2.
11. Press the BACK/R/C button to exit the menu or press the HANG UP
button to return to standby mode.
Set ring delay
1. Press the MENU/OK key to enter menu selection.
2. Press the Navigation (
or
) key to select Answ. Machine and then
press MENU/OK key to select.
3. Press the Navigation (
or
) key to select Settings.
4. Press MENU/OK key to display Ring Delay, press MENU/OK button to
enter option list .
5. Press the Navigation (
or
) key to select Rings 3-8 or Toll Saver and
then press MENU/OK key to confirm your choice.
6. A confirmation beep is played. Press HANG-UP key to go back to
standby mode.
* If you select Toll Saver mode, the answering machine will answer calls
and start playing the greeting message after 5 rings if you have no new
messages or after 3 rings if there is at least one new message recorded.
Содержание 2132
Страница 13: ......
