3
Setting Up the TV/VCR
Startup
4. Connect antenna or cable-TV system
Connect a home antenna or a cable-TV system. Details on pages 29-32.
5. Connect external speaker and select speaker switch
setting (optional)
Details on page 33.
6. Plug in the TV/VCR
Attach the power cord to the back of the TV/VCR. Plug the power cord
into the wall outlet, matching the wide blade of the plug with the wide
slot in the outlet. Be sure to insert the plug completely.
You can also power the TV/VCR with the DC car cord. First, plug the
square end of the DC car cord into the jack on the back of the TV. Plug
the other end into the cigarette lighter socket of a car or truck. Operate
TV/VCR as usual.
Always unplug the DC car cord from the cigarette lighter socket before
you unplug the cord from the back of the TV/VCR. Removing the plug
from the TV/VCR first may damage the fuse in the DC car cord.
Note:
Make sure the vehicle has a negative ground. The DC car cord is
designed for use only in cars or trucks with negative (-) ground
(negative terminal of car battery is connect to car chassis). The DC car
cord should never be used in cars with a positive (+) ground. If you are
unable to identify the negative (-) or positive (+) polarity of your car,
consult your car’s owner’s manual or check with an authorized service
station before use.
7. Turn on the TV/VCR
Press
POWER
on the front of the TV/VCR or press
TV
or
VCR
on the
remote. The indicator in the
POWER
button on the front of the
TV/VCR will light when the TV/VCR is on.
IMPORTANT:
To turn on the TV/VCR when it is in DC mode, you
must press and hold
TV
or
VCR
on the remote for more than 3 seconds.
This is to prevent the TV/VCR from being turned on accidentally and
draining the car battery.
Cautions for Car Battery Operation
1. Use of an improper DC power cord or similar adapter may
result in damage to your TV/VCR.
2. Do not use the TV/VCR in a car unless the engine is turned on
and running to avoid draining the car battery.
3. Do not leave the TV/VCR in a car parked in direct sunlight
since the temperature inside the car may damage the TV/VCR.
4. If you take the TV/VCR from a cold car to a warm room do not
plug in the set if there is any sign of condensation. This could
damage the set. Allow it to adjust to room temperature first.
5. Do not block any of the ventilation slots when the set is turned
on. This may cause overheating and damage the set.
Содержание 1543007A
Страница 1: ...USER S GUIDE TV VCR COMBINATION ...