7
Using the Remote Control
Buttons on the Remote Control
POWER
Press to turn the TV on. Press again to turn the TV off.
0-9 (Direct Channel Selection Buttons)
Allows direct access to any channel.
CALL
When you press this button, the channel number will appear in the upper right corner of the screen.
Press the button again to remove display from the screen.
CH (CHANNEL)
/
Buttons
Press the
button to change to a higher numbered channel set into
memory. Press the
button to change to a lower numbered channel set into memory.
CH.1/2
Switches between Channel 1 and Channel 2 in the Closed Caption mode.
ENTER
Press to enter or select information for On-Screen operations.
MENU
Press to display the On-Screen menu function.
MUTE
To turn off the sound, press this button once. The TV will be silenced and the symbol “MUTE”
will appear on the screen. The mute feature can be released by pressing the MUTE button again or one of
the VOL
or
buttons.
QUICK VIEW
This button allows you to go back to the previous channel selected by just pressing the
QUICK VIEW button. Press this button again to return to the channel you were watching.
RESET
Press to reset the On-Screen picture adjustments to their factory preset positions.
SET -/+ Buttons
Press to select the desired setting during On-Screen operations.
SLEEP
To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote con-
trol. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, ...
20, 10, 0.
After the sleep time is programmed, the display will disappear then reappear momentarily every ten minutes
to remind you the sleep timer function is operating. To confi rm the sleep time setting, press the SLEEP
button once and the remaining time will be momentarily displayed. To cancel sleep time, press the SLEEP
button repeatedly until the display turns to 0.
TV/AV
Switches between TV and external inputs.
TV/CAP/TEXT
Press this button to switch between normal TV and the two Closed Caption modes (cap-
tions and 1/2 of full screen text). Closed Captioning will display text on screen for hearing impaired viewers.
VOL (VOLUME)
/
Buttons
Press the
button to increase, or the
button to decrease the volume
level.
Battery Precautions
These precautions should be followed when using batteries in this
device:
1. Use only the size and type of batteries specifi ed.
2. Be sure to follow the correct polarity when installing the batter-
ies as indicated in the battery compartment. Reversed batteries
may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery
leakage.
5. Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery manufacturer’s
directions.)
Installing the Batteries
Before using the remote control transmitter,
batteries must fi rst be installed.
1. Open the battery compartment cover.
2. Install two “AAA” batteries.
3. Replace the battery compartment cover.
Use two “AAA” size batteries (not supplied)
for the transmitter. The batteries may last
approximately one year depending on how
much the remote control is used. For best
performance, it is recommended that batteries
should be replaced on a yearly basis, or when
the remote operation becomes erratic. Do not
mix old and new batteries or different types.
MENU
VOL
SLEEP
MUTE
QUICK VIEW
CALL
VOL
ENTER
CH
CH
1
2
3
4
5
6
7
0
8
9
–
SET
+
CH.1/2
TV/CAP/
TEXT
RESET
TV/AV
POWER
