12
Other Information
Troubleshooting
You can correct most problems you have with your product by con-
sulting the following troubleshooting list. If you need service, please
refer to the service centers in this user's guide or contact the store
where you purchased this product.
TV Problems
TV does not operate.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
Poor sound or No sound.
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (VOLUME and MUTE).
• Check for sources of possible interference.
Poor picture or No picture.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
Poor reception on some channels.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive desired station.
• Check for sources of possible interference.
Poor color or No color.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
Picture wobbles or drifts.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
No CATV reception.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
Horizontal or diagonal bars on screen.
• Check antenna connections, adjust or re-direct antenna.
• Check for sources of possible interference.
No reception above channel 13.
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
No remote operation.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confi rm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
TV shuts off.
• No broadcast on station tuned.
• Power interrupted.
Closed Caption is not activated.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or rotate
antenna.
• Press TV/CAP/TEXT button to turn on the closed caption decoder.
Display is not shown in your language.
• Select proper language in the menu options.
Specifi cations
Model: 14M041 20M041
AC Power Input: 120V, 60Hz 120V, 60Hz
AC Power Consumption: 54 Watts 73 Watts
Audio Power Output Rating: 1.0 Watts 1.5 Watts
Chassis Construction: IC Solid state IC Solid state
Horizontal resolution: 260 lines 260 lines
Picture Tube: 14" 20"
(measured diagonally)
Dimensions: 14-1/4" (W) x 19-3/16" (W) x
14-3/16" (D) x 18-5/16" (D) x
12-5/8" (H) 16-3/8" (H)
Weight: 20.9 lbs 38.6 lbs
Models: 14M041 & 20M041
Speaker: 3" Full Range, 8 ohm
Tuner Type: 181 Channel,
Quartz PLL Frequency Synthesized
Remote Control: Infrared, Direct Access,
2 x AAA batteries (not supplied)
Receiving Channels: VHF 2-13
UHF 14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
Antenna Input Impedance: 75 Ohm (VHF/UHF/CATV) Coaxial Input
Input: Video: 1.0 Vp-p 75 ohm
Audio: 300 mV, 47k ohm
