66
Performing a Factory Reset
If someone else has used your LumenDimM4micro,
or you just want to get back to a known
configuration, performing a factory reset is easy:
Power on the device. The green COP indicator will
be blinking.
Press and hold Func, briefly tap (press and release)
the SetAB button, then release Func. Several
indicators will blink together to confirm that
factory settings are restored.
NOTE: This does NOT affect transmitter linking.
You must intentionally unlink to disconnect from a
previously linked transmitter.
PRO TIP:
If you are not sure what mode or setting
you may have selected, you can always get back
to a known starting point by returning to factory
default.
RF
F
CD
AB
RF Conn
SetAB
Func
DMX Data
COP
-D -C -B -A
+
IN-
DimA
DimB
DimC
DimD
