6.
Use a tape measure to set the recorded dept of the wheel mount. Torque the hardware to 90 ft
-
lbs. using a 3/4”
wrench and socket.
See Photos 7 and 8.
7.
Locate the 4 gaskets.
See Photo 9.
8.
Install 1 of the gaskets onto each mount on the bottom of the tire carrier mount.
See Photo 10.
9.
Apply painters tape onto the bed floor of the vehicle.
See Photo 11.
10.
Set the tire carrier on the tape in the bed of the vehicle.
See Photo 12.
Photo 7
Photo 8
Photo 9
Photo 10
Photo 11
Photo 12
Set the recorded depth of the wheel mount.
Tighten the installed hardware.
Locate the 4 gaskets.
Install the gaskets on the mounts.
Apply painters tape onto the bed floor.
Set the tire carrier on the tape in the bed.
