FXLED 200W 300W INSTALLATION INSTRUCTIONS
Thank you for buying RC lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-722-1000 or email: [email protected]
®
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4) #10-24
Stainless
Steel Screws.
Screws are provided with the accessory. See
fig. 3 for Guard. See fig. 4 for Shield
1.
Line up guard or shield with existing pre-drilled holes in
frame as shown, tighten screws.
GUARD & SHIELD INSTALLATION
The Wire Guard and Poly Shield can be mounted on the
same fixture with (4) #10-24 screws as shown below.
Stainless
Steel
Screws
Fig. 3
Fig. 4
Easy Installation & Product Help
Tech Help Line
Call our experts 888 722-1000
rclighting.ca
Visit our website for product info
Answered promptly [email protected]
©2015 RC LIGHTING, LLC
Northvale, New Jersey 07647 USA
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
FXLED 200 300 IN 0415 RCL
Patent -
US:
pat. D659,280
ON-OFF WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. Units ordered with (/347V) suffix are 347V, 50Hz or
60Hz. For Non-Dimming, follow the wiring directions as in fig. 1.
1.
Connect the black fixture lead to the (+) LINE supply lead.
2.
Connect the white fixture lead to the (-) COMMON supply
lead.
3.
Connect the GROUND wire from fixture to supply ground.
LIGHT
FIXTURE
(+)LINE
BLACK
(-)COMMON
WHITE
GROUND
GROUND
Fig. 1
Fig. 2
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. For fixtures with Trunnion mounting, a 5-wire
cord will be provided. For 0-10V Dimming, follow the wiring
directions as in fig. 2.
1.
Connect the black fixture lead to the (+) LINE supply lead.
2.
Connect the white fixture lead to the (-) COMMON supply
lead.
3.
Connect the GROUND wire from fixture to supply ground.
Do NOT connect the GROUND of the dimming fixture to
the output.
4.
Connect the purple fixture lead to the (V+) DIM lead.
5.
Connect the gray fixture lead to the (V-) DIM lead.
6.
Cap the yellow fixture lead, if present. Do NOT connect.
Stainless
Steel
Screws
Stainless
Steel
Screws
