RC-Tek SJM325-C Pro SE, Справочное руководство

Страница: 3 / 33

3
RC-TEK
SJM325-C PRO SE Reference Manual
Pre Flight Checks:
1. As a precautionary avoidance to frequency interference (two different helicopters utilizing the same frequency), it is important to keep the remote
controllers and helicopters apart for at least a distance of 0.5 miles. In order to prevent accidental encounters from occurring; please make sure the
surrounding areas (the flight area) are not populated with crowds and/or buildings (look for open space). Any open space vicinity should be at least 100 feet
in all directions.
2. Make sure the battery is completely charged. Read carefully the suggested charging time and maintenance procedures listed in the instruction manual.
Attempted flight without a fully charged battery will result in an unexpected loss of power, directional control, and/or costly accidental crashes. Remember,
by NOT discharging the battery completely during usage, you will maintain its efficiency and increase its life span.
3. You are now ready to turn ON both the transmitter (remote control) and the receiver (located on the helicopter). Make sure the helicopter is placed on a
flat leveled surface on the ground before commencing. Always turn on the transmitter (remote control) FIRST before turning on the receiver.
4. Test and confirm the directional controls are working properly. Try moving the directional stick and study the resulting effects of the helicopter. If no
resulting movement is noticed when moving the directional stick, do not attempt flight as either the helicopter or the remote control may be defective.
5. Before any test flight, it is recommended to tie the helicopter to a fixed restraint mechanism under safe conditions and then gradually increase its power;
making sure the helicopter can perform various movements until at least one battery is depleted in order to confirm all parts fit properly. When finished,
carefully check the entire helicopter over to see if there are any loose parts and/or screws and make adjustments as needed.
The following guidelines list the most recommended methods for a beginner to commence their journeys into the remote control flying realm (listed in the
order of importance):
1. Find an experienced Instructor – most likely can be found at your local hobby store.
2. Join a RC club in your nearby area – can be found through the internet, hobby stores, parks, and friends (word of mouth).
3. Make sure you are standing directly behind the helicopter before any attempted flight.
4. Slowly introduce power to the helicopter in a continuous and stable pace.
5. Analyze carefully the characteristics of the helicopter. As more power is introduced, the helicopter will begin its ascension progress. Make directional
adjustments to counter and insure a linear ascending or descending path.
6. Make sure never to exceed a flying height of over 3 feet! Anything over the recommended height can and may cause major damage to the helicopter
if crashed.
Copyright © 2008 RC-TEK/SGB Enterprises LLC. All Rights Reserved.