Thank you for purchasing the PRO20-GPS Drone. Please read all
instructions and warnings carefully before operating. Please also keep this
instruction manual for future reference and maintenance.
IMPORTANT:
1. This drone is not a toy. It may cause injury or damage if not used properly
under a controlled environment. Always make sure you practice flying this
drone in an open airspace area while following the rules and regulations
which applies to the area to avoid any potential damage or Injury
.
2. This product is suitable for experienced UAV pilots no less than 14 years of
age.
SAFETY PRECAUTIONS:
1. Keep it far away from any structures or crowds.
This R/C drone may vary slightly in speed or sensitivity while flying and can
cause potential danger. Therefore, please keep it far away from crowds,
buildings, trees, structures, high-voltage wire, etc. Please also avoid flying in
adverse weather conditions such as rain, electrical storms, and high winds
to ensure safety of the user, any spectators, and surrounding property.
2. Keep it away from any moist environment.
The inside of the drone is composed of many precision electronic and
mechanical parts. Therefore, please try to avoid any moisture or water content
from entering the main body of the drone as it may cause a breakdown of
the mechanical and electronic parts and thus cause an accident.
3. Only operate with included parts for intended use.
Always use original parts made and authorized by RC-PRO for replacements
and maintenance to insure flight safety.
DO NOT use for any illegal purpose or use beyond the scope of which your local
laws and regulations have stipulated.
4. Do not operate under the influence of drugs or alcohol.
Please operate this R/C drone according to your own state and flying skill.
Any fatigue, bad mental state, or incorrect operation may increase the
probability of accidental risk.
5. Store it in a cool, dry place.
The R/C aircraft is composed of material such as metal, fiber, plastic,
electronics, etc. Therefore, please keep it away from any heat source and
avoid prolonged exposure to direct sunlight. Excessive heat exposure can
cause distortion and damage.
1
INTRODUCTION
