RC Guys Super Decathlon ARF, Инструкция по сборке

Страница: 20 / 27

Using a sharp Xacto knife, remove the covering from the fuse where the
lower wing strut will be located.
Install the wing strut bracket into the fuse using the supplied 6­32 x ¾”
bolts. You will notice that the T nuts have been factory installed.
Note: Be very careful that you do not cross thread any of the bolts as this
may loosen the T nuts.
Insert the bottom of the rear strut into the slot in the front strut and bolt
together using a 6­32 x ½” bolt and lock nut.
Slide the lower front wing strut cuff over the wing strut.
Note: You may have to trim the cuffs with a razor saw or Dremel for
the best fit.
Using the supplied hardware, (6­32 x ½” bolt), secure the wing strut
to the wing strut bracket. Do not tighten as yet.
Slide the forward top wing strut cuff over the strut noting its direction
and shape.
Note: Install the struts with the airfoil shape facing the proper
direction
Slide the rear wing strut into the slot in the front wing strut and secure it using the supplied hardware, 6­32 x ½” bolt and
nut.
­18­