RC Guys Super Decathlon ARF, Инструкция по сборке

Страница: 15 / 27

Front Windshield Installation
Collect these parts.
ÿ 1 ­ front windshield
ÿ 6 ­ small wood screws
Position the front windshield over the fuse making sure it is even and slightly over the top edge of the fuse. It should also
fit well along side the front edges of the leading edge of the wings and flat on the front of the fuse.
Using a marker, carefully mark where the screws will go, 3 on each side. Remove the windshield and drill a small hole
over these marks. Re­position the windshield and secure it to the fuse using the supplied 6 wood screws. Do not over
tighten the screws.
Note: You may also use canopy glue to secure the windshield. Tape to hold in place until the glue dries.
­13­