E L E C T R I C B I C Y C L E M A N U A L - P L U T O S E R I E S
M O D E L S
Page 28
J
I
Vehicle Debugging Instruction
H). Pressing and at the same time to check the set of some general After the electric bike system is
switched on, to access general settings menu, hold both
“
UP
”
and
“
DOWN
”
button for 2 s. Press
“
Up
”
or
“
DOWN
”
button to select the content, press
“
MODE
”
to confirm the corresponding settings.
Attention: terminal clients can not amend parameters, if a series of riding accidents occurred after your modification such as the
damage of the mater, the burning of controller and so on, our company will not shoulder the responsibility.
I). If you whirl the crankset when the assistant level is at any speed level (except 0), the working indicating light of assistant sensor
will be lighted up and the motor works normally.
J).
Hold “down” button for seconds, the motor works normally and brake the brake lever slightly until the motor is stopped because
the motor is cut from the power by brake.
