3.
Attach the wheels to the axles by pushing the wheel locking button on the
outside of the wheel and inserting the axle extension into the wheel.
Make sure
to keep the locking button on the outside of the wheel pushed in during this
process, in order to enable the axle extensions, including the two pins, to be
inserted all the way into the wheel
. If not locked in, the wheel will not be
connected to the clutch and will not be propelled!!! Test the lock by trying to
pull the wheel out. To disassemble the wheels proceed in reverse order. If you
feel the wheels are not working then take them off – switch the power on and if
the axle rotates you will know you have not pushed the wheels all the way in.
4. Place battery pack on battery tray and fasten Velcro strap around battery and
fasten tightly. Insert battery plug into caddy outlet.
5. Insert anti-flip wheel into frame -
only for remote control model.
