R A Z O R B A C K O F F R O A D . C O M
7
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
Installation Instructions
The following are general instructions for installation of
the RBO “It Fits™” Rotopax Mount.
STEP 1
0” OFFSET
(0” - STEP 1.1)
To set the “IT FITS™” Rotopax™ Mount to its first offset
position (0”) place the Offset Arm into the It Fits Mounting
Bracket until the base of the Offset Arm is resting flush
against the Mounting Bracket and the holes in the Offset Arm
and Mounting bracket are aligned as shown in the image to the
right.
See Figure 1.1
1/2” OFFSET
(1/2” - STEP 1.1)
To set the “IT FITS™” Rotopax mount to its second offset
position (1/2”) place the Offset Arm into the It Fits
Mounting Bracket and align the first sets of holes at
the base of the Offset Arm with the sets of holes in the
Mounting Bracket as shown in the image to the right.
See Figure 1.2
Setting the offset of the “It Fits™” Rotopax Mount:
Fig. 1-1
Fig. 1-2
