Make opening for servo steering arm and wires as per plan
The stabilizer is joined in the rudder
Use a wire to measure the alignment of the stabilizer to the fuselage
Before this we have to sheet the fuselage with the 2,5x12x1000 (24pcs) strip balsa
Start in the center and work your way to the top
The hatch cutout should be made soon as it is likely to have it glued to the forms so carefully use glue
there and cut out hatch asap, note that the hatch shown here is not in the kit , the kit has a larger
further forward 2 formers long hatch
